Roll Valley (Valley Flashing)
Description
Roll Valley, Size 6″, 8″, 10″, 12″, 14″, 20″ x 10′ of 50′ Long, 28 or 26 ga Galvanized Steel or Painted, Aluminum. Roll Valley is rust-resistant flashing that can be bent, cut and shaped for many weatherproofing projects. This product is used to make custom flashings, for commercial or residential use. For architectural, residential, and commercial roofing. ASTM A-653, ASTM A-792 (for Steel)
| Variant |
|---|
| Aluminum 6″ 10′ |
| Aluminum 6″ 50′ |
| Aluminum 8″ 10′ |
| Aluminum 8″ 50′ |
| Aluminum 10″ 10′ |
| Aluminum 10″ 50′ |
| Aluminum 12″ 10′ |
| Aluminum 12″ 50′ |
| Aluminum 14″ 10′ |
| Aluminum 14″ 50′ |
| Aluminum 20″ 10′ |
| Aluminum 20″ 50′ |
| Galvanized 6″ 10′ |
| Galvanized 6″ 50′ |
| Galvanized 8″ 10′ |
| Galvanized 8″ 50′ |
| Galvanized 10″ 10′ |
| Galvanized 10″ 50′ |
| Galvanized 12″ 10′ |
| Galvanized 12″ 50′ |
| Galvanized 14″ 10′ |
| Galvanized 14″ 50′ |
| Galvanized 20″ 10′ |
| Galvanized 20″ 50′ |
| Brown 6″ 10′ |
| Brown 6″ 50′ |
| Brown 8″ 10′ |
| Brown 8″ 50′ |
| Brown 10″ 10′ |
| Brown 10″ 50′ |
| Brown 12″ 10′ |
| Brown 12″ 50′ |
| Brown 14″ 10′ |
| Brown 14″ 50′ |
| Brown 20″ 10′ |
| Brown 20″ 50′ |
| Charcoal 6″ 10′ |
| Charcoal 6″ 50′ |
| Charcoal 8″ 10′ |
| Charcoal 8″ 50′ |
| Charcoal 10″ 10′ |
| Charcoal 10″ 50′ |
| Charcoal 12″ 10′ |
| Charcoal 12″ 50′ |
| Charcoal 14″ 10′ |
| Charcoal 14″ 50′ |
| Charcoal 20″ 10′ |
| Charcoal 20″ 50′ |
| White 6″ 10′ |
| White 6″ 50′ |
| White 8″ 10′ |
| White 8″ 50′ |
| White 10″ 10′ |
| White 10″ 50′ |
| White 12″ 10′ |
| White 12″ 50′ |
| White 14″ 10′ |
| White 14″ 50′ |
| White 20″ 10′ |
| White 20″ 50′ |
Product Specifications
Frequently Asked Questions
Is the steel in Roll Valley (Valley Flashing) to an ASTM standard?
The applicable standards are ASTM A653 for galvanized steel, and ASTM B209 for Aluminum sheet metal.
Where is Roll Valley Flashing installed?
Roll valley flashing is universally applicable and can be installed along the intersection of two roof slopes, beneath or between the adjoining roof coverings, next to roof edgings, and at the base of walls. It can also be used to make chimneys, skylights, and other roof openings watertight.
Should I use galvanized or aluminum for Roll Valley (Valley Flashing)?
For Roll Valley (Valley Flashing), galvanized steel is the general-purpose choice; aluminum is lighter and will not rust, also more flexible when onsite matching complex configurations are needed.
What lines a roof valley and carries the water down it?
Roll valley flashing lines roof valleys and carries water down the intersection between two roof slopes.
What metals can I get Roll Valley (Valley Flashing) in?
Roll Valley (Valley Flashing) is made from aluminum or galvanized steel.