Pipe Flashing South Style
Description
Pipe Flashing is made of 26 Gauge Galvanized Steel or Aluminum. Standard, FHA, Shingle or Shake Bases, Pitch is Flat-to-5/12, for any types of pipe. Pipe Flashings, or boots, are used to seal around vent pipes that penetrate through the roof. One piece construction makes this flashing reliable and easy to install. They protect against leaks around kitchen, bath, laundry and water heater exhaust pipes that terminate through the roof. For architectural, residential, and commercial roofing. ASTM A-653, ASTM A-792
| Variant |
|---|
| 1/2″ Galvanized |
| 1/2″ Aluminum |
| 3/4″ Galvanized |
| 3/4″ Aluminum |
| 1″ Galvanized |
| 1″ Aluminum |
| 1-1/2″ Galvanized |
| 1-1/2″ Aluminum |
| 2″ Galvanized |
| 2″ Aluminum |
| 3″ Galvanized |
| 3″ Aluminum |
| 4″ Galvanized |
| 4″ Aluminum |
| 5″ Galvanized |
| 5″ Aluminum |
| 6″ Galvanized |
| 6″ Aluminum |
| 7″ Galvanized |
| 7″ Aluminum |
| 8″ Galvanized |
| 8″ Aluminum |
| 4″ Oval Galvanized |
| 4″ Oval Aluminum |
Product Specifications
Frequently Asked Questions
Is the steel in South Style Pipe Flashing to an ASTM standard?
ASTM A653 applies to the galvanized steel used to make the product.
What is the difference between South Style Pipe Flashing and North Style Pipe Flashing?
The two styles differ by base. North California style uses regular, shingle or shake bases, South California uses standard and FHA bases. Both suit pitches from flat through 5:12. Additionally, North California style uses a round connection point between the cone and the neck while South California uses an oval connection point (only applicable for pipe flashings made from galvanized steel).
Should I use galvanized or aluminum for South Style Pipe Flashing?
For South Style Pipe Flashing, galvanized steel is less expensive, made for general-purpose use, and suitable for asphalt shingles, flat tile, and built-up roofing systems. Aluminum is suitable for most tile roofs because the soft flanges can be bent to match the roof tile's exact configuration.
How is an oval roof penetration sealed with a South California style pipe flashing?
Penetrations are sealed with appropriate caulking or a melted compound that matches the roofing membrane material. The South CA Style Pipe Flashing weatherproofs an oval roof penetration using a standard or FHA-style base configured for the specified roof covering and pitch.
Which metals are South Style Pipe Flashing made from?
South CA style Pipe Flashing is made from galvanized steel, stainless steel, copper or aluminum.
What gauge is South Style Pipe Flashing?
South Style Pipe Flashing is made in 26 gauge.
Which base styles are available for South Style Pipe Flashing?
South Style Pipe Flashing is available with standard or FHA base flanges.
What roof pitch range can use South Style Pipe Flashing?
South Style Pipe Flashing is designed for roof pitches from flat through 5:12.