Description
The latest addition in our ever-expanding line of
products. Manufactured with top-quality ASTM A-653 galvanized steel, guarded with two layers of 1/16″ wire or 1/8″ expanded metal mesh, and fortified with intumescent tape for protection against radiant heat, flying embers, and direct flame penetration. Review the current product-specific test documentation and listing for the applicable configuration before specifying or installing this retrofit face. Other styles, sizes, and materials (bonderized, copper, aluminum) are available as a custom order upon request.
| Variant |
|---|
| Galvanized 9 x 18 |
| Galvanized 12 x 24 |
| Aluminum Flange 9 x 18 |
| Aluminum Flange 12 x 24 |
Half round retrofit face part numbers and NFA
| Part number | Published face dimensions | Approximate NFA |
|---|---|---|
| 5800-R | 18½ × 9 × 4 in. | 36 in² |
| 5870-R | 24½ × 12 × 4 in. | 66 in² |
Half-round dormer retrofit face drawing and NFA specification
These dimensions describe the retrofit face geometry, not a rectangular rough opening. Match the existing dormer’s arch profile, depth and mounting perimeter to the labeled drawing.
The NFA figures are published for the faces. Check the existing vent, retained mesh and complete installed air path before using them as the available NFVA of the finished assembly. Request the installation instructions for the selected face; gable louver instructions do not automatically apply.
Source documents checked November 12, 2026. Confirm the ordered configuration, dimensions, available ventilation area and installation documents for the project.
Product Specifications
Frequently Asked Questions
Is the steel in MGV Retrofit Face for Half-Round Dormers to an ASTM standard?
ASTM A653 applies to the galvanized steel used to make the product.
How do I choose the right size of MGV Retrofit Face for Half-Round Dormers?
Match the existing half-round dormer face width, height and arch profile dimensions.
Which of the metals offered for MGV Retrofit Face for Half-Round Dormers should I choose?
For MGV Retrofit Face for Half-Round Dormers, galvanized steel is the general-purpose choice; stainless steel is highly corrosion resistant; copper is chosen where the metal is meant to be seen and to weather naturally.
How do you add ember protection to a dormer that is already installed?
The MGV retrofit face adds ember- and flame-resistant protection to a compatible existing half-round dormer vent while preserving ventilation.
Which metals do MGV Retrofit Face for Half-Round Dormers come in?
The MGV Retrofit Face for Half-Round Dormers is made from galvanized steel, aluminum, bonderized steel, or copper.
Which mesh options are available for MGV Retrofit Face for Half-Round Dormers?
Available mesh configurations include 1/16 and 1/8. Mesh selection affects the product configuration and ventilation performance.

